Dragon — Quick Setup (out-of-the-box)

Overview
The Dragon router is designed for easy setup. This guide walks through physical setup, powering on, and initial network configuration.

What you’ll need

• Dragon router (included in Momentum/Freedom packages)
•  Power adapter (in box)
• Wifi login details (Scan QR Code on the bottom of the Dragon or copy login information)

Steps

1. Power on the Dragon. Plug in the power adapter and wait ~2 minutes for boot. LEDs will indicate status.
2. Connect Antennas. Connect your antennas that are color coded
3. Connect a device:  Use Wi-Fi (SSID printed on the sticker) or connect an Ethernet device to a LAN port.
4. Run a speed test. Confirm expected speeds and reposition the Dragon for better coverage.

Tips

• Place the Dragon centrally and elevated for best coverage.
• If your package includes a T-shirt or 1-yr support, confirm membership details in your account.

Troubleshooting

• No internet: Restart modem → Dragon. Confirm WAN LED is lit.
• Weak Wi-Fi: Move the Dragon away from thick walls or electronics; enable mesh mode if using multiple units.